Separated Wall Setters / Ceiling Controllers

- Complete Configurable Control Parameters.
- AC 24V (CE Certified) / 110V(CE Certified) / 230V(CE Certified) +/-15% 50/60Hz.
- Advanced Proportional / Integral (PI) Control.

▌Thermostats/ Controllers/ Humidistat : On-Off

WDS091 Series-Wall Setters with Digital Display

▍Specification:

․Operator Interface for connecting to TCM/B series direct digital unitary controllers or others which need room temperature information and user settings.
․Digital display of sensed zone temperature and temperature setting and controller status.
․Push button operation for setting and commanding.
․Built-in a NTC temperature sensor.
․Graphical icon LCD display with optional LED backlight.
․4-pin screw-in terminals for easy connection to controller and trouble free installation.

WBS091 Series-Wall Setters with Digital Display

▍Specification:

․Operator Interface for connecting to direct digital unitary controllers or others which need room temperature information and user settings.
․Digital display of sensed zone temperature and temperature setting and controller status.
․Push button operation for setting and commanding.
․Built-in a NTC temperature sensor.
․Graphical icon LCD display with optional LED backlight.
․4-pin screw-in terminals for easy connection to controller and trouble free installation.

TCM/B400 Series-Modbus/BTL certified BACnet Full Configurable Direct Digital Unitary Controllers

▍Specification:

․RS485 Modbus/ RTU or BTL certified BACnet MS/TP open protocol communication with complete baud rate selections.
․Suitable for 2-pipe or 4-pipe Fan-coil HVAC system of On/Off controls.
․Effective run time accumulation for system reading/resetting.
․Optional 1- to 3- fan speed can be operated in the mode of auto changeover or manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover with adjustable zero energy band.
․Full configurable parameters such as switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to on/off control.
․Optional Wall Setter.
․Optional Remote sensor (RS) input interface for connecting to remote temperature sensor.
․Selectable temperature sensor input from wall setter or RS interface.
․Optional energy saving input (ESI) interface for room occupied/unoccupied detection device.
․Optional one extra digital input interfaces for window or door open/close detection device.
․Adjustable unoccupied setpoints for heating and cooling mode control.
․Optional settable countdown Timer (0 to 24 hours) function to stop control outputs when time expires.
․Optional sleep mode function for raising 2 ℃ temperature setpoint in 2 hours.
․Non-volatile memory (EEPROM) retains user settings during power loss
Control off output when system at “OFF” status.
․Maximum and minimum set-point limits settable.
Swiss official fake rolex watches UK for sale are cheap for men and women.

The discounted online store provides wholesale rolex replica watches UK with Swiss movements.

Place an order for UK cheap replica rolex watches online is convenient and guaranteed.

▌Thermostats/ Controllers/ Humidistat : Modulating

WDS091 Series-Wall Setters with Digital Display

▍Specification:

․Operator Interface for connecting to TCM/B series direct digital unitary controllers or others which need room temperature information and user settings.
․Digital display of sensed zone temperature and temperature setting and controller status.
․Push button operation for setting and commanding..
․Built-in a NTC temperature sensor.
․Graphical icon LCD display with optional LED backlight.
․4-pin screw-in terminals for easy connection to controller and trouble free installation.

WBS091 Series-Wall Setters with Digital Display

▍Specification:

TCM/B700 Series-Modbus/BTL certified BACnet Networked Full Configurable PI Modulating with On/Off Heating/ Cooling Controllers

▍Specification:

․RS485 Modbus/ RTU or BTL certified BACnet MS/TP open protocol communication with complete baud rate selections.
․The fan speed can be operated in the mode of auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature selectable for normal display Full configurable parameters such as switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to modulating control 0(2) to 10 Vdc or 10 to 0(2) Vdc control signal output selectable for direct / reverse acting output.
․Optional multi-stage on/off control outputs.
․Optional Wall Setter.
․Optional Remote sensor (RS) input interface for connecting to remote temperature sensor.
․Selectable temperature sensor input from wall setter or RS interface.
․Optional energy saving input (ESI) interface for room occupied/unoccupied detection device.
․Optional extra digital inputs for monitoring.
․Adjustable unoccupied setpoints for heating and cooling mode control
Optional settable countdown Timer (0 to 24 hours) function to stop control outputs when time expires.
․Optional sleep mode function for raising 2 ℃ temperature setpoint in 2 hours.
․Non-volatile memory (EEPROM) retains user settings during power loss.
․Control off output when system at “OFF” status Maximum and minimum set-point limits settable.

▌Thermostats/ Controllers/ Humidistat : Floating

WDS091 Series-Wall Setters with Digital Display

▍Specification:

․Operator Interface for connecting to TCM/B series direct digital unitary controllers or others which need room temperature information and user settings.
․Digital display of sensed zone temperature and temperature setting and controller status.
․Push button operation for setting and commanding..
․Built-in a NTC temperature sensor.
․Graphical icon LCD display with optional LED backlight.
․4-pin screw-in terminals for easy connection to controller and trouble free installation.

WBS091 Series-Wall Setters with Digital Display

▍Specification:

TCM/B500 Series-Modbus/ BTL certified BACnet Full Configurable Digital Floating Control Temperature Controllers

▍Specification:

․RS485 Modbus/ RTU or BTL certified BACnet MS/TP open protocol communication with complete baud rate selections.
․Suitable for 2-pipe or 4-pipe Fan-coil HVAC system of floating controls.
․Effective run time accumulation for system reading/resetting.
․Optional 1- to 3- fan speed can be operated in the mode of auto changeover or manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover with adjustable zero energy band.
․Full configurable parameters such as switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to on/off control
․Optional Wall Setter.
․Optional Remote sensor (RS) input interface for connecting to remote temperature sensor.
․Selectable temperature sensor input from wall setter or RS interface.
․Optional energy saving input (ESI) interface for room occupied/unoccupied detection device.
․Optional one extra digital input interfaces for window or door open/close detection device.
․Adjustable unoccupied setpoints for heating and cooling mode control
Optional settable countdown Timer (0 to 24 hours) function to stop control outputs when time expires.
․Optional sleep mode function for raising 2 ℃ temperature setpoint in 2 hours.
․Non-volatile memory (EEPROM) retains user settings during power loss
․Control off output when system at “OFF” status.
․Maximum and minimum set-point limits settable.

▌Signal Converter Board

DxA1 Series-Signal Converter Board

▍Specification:

Signal Output：
․1-channel resistor based signal output.
․Output range and rating:775~1550 ohm, 100mW.
Signal Input：
․1~5-channel dry-contact based signal inputs.
Others：
․Supply Voltage：24Vdc or 24Vac,+/-10%, 50/60 Hz
․Operating Environment：0 ~ 50oC, 5 ~ 85% RH (non-condensing)
․Wiring：14 Screw terminals, each terminal capable of accepting
14 to 22 AWG wires.
․Dimensions：72×72x25 mm (W × H x D) – without housing.
․Mounting：Mounts directly in control box.