TBB400-H Series-BTL Certified BACnet® MS/TP Digital FCU Thermostats With Both Temperature and Humidity Displays

▍Specification:

․BTL certified BACnet MS/ TP, RS-485 open protocol
communication with complete baud rate selections
․Suitable for 2-pipe or 4-pipe Fan-coil
HVAC system of On/Off controls.
․Effective run time accumulation for system
reading/resetting
․The 1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Each button and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBM400-H Series-Modbus Full Configurable Digital FCU Thermostats With Both Temperature and Humidity Displays

▍Specification:

․RS-485 Modbus/ RTU open protocol communication
with complete baud rate and parity selections
․Suitable for 2-pipe or 4-pipe Fan-coil
HVAC system of On/Off controls.
․Effective run time accumulation for system
reading/resetting
․The 1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Each button and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBS400-H Series-Full Configurable Digital FCU Thermostats With Both Temperature and Humidity Displays

▍Specification:

․Suitable for 2-pipe or 4-pipe Fan-coil
HVAC system of On/Off controls.
․The 1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional digital input (DI) contact for
connecting to room’s door/window contact
to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Each button and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBB700-H Series-BTL Certified BACnet® MS/TP Digital Modulating Control Thermostat with Both Temperature and Humidity Displays

▍Specification:

․BTL certified BACnet MS/ TP, RS-485 open protocol
communication with complete baud rate selections
․Effective run time accumulation for system
reading/resetting
․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Full configurable parameters such as switching
differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to modulating control and/or floating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Minimum Cycle/ On/ Off time settable
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input for
Window/ Door open detection to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBM700-H Series-Modbus Digital Modulating Control Thermostat with Both Temperature and Humidity Displays

▍Specification:

․RS-485 Modbus/ RTU open protocol communication
with complete baud rate and parity selections
․Effective run time accumulation for system
reading/resetting
․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to modulating control and/or floating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Minimum Cycle/ On/ Off time settable
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input for
Window/ Door open detection to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBS700-H Series-Full Configurable Modulating Control Thermostats With Both Temperature and Humidity Displays

▍Specification:

․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to modulating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Minimum Cycle/ On/ Off time settable
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional digital input (DI) contact for
connecting to room’s door/window contact
to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBB500-H Series-BTL Certified BACnet Full Configurable Floating Control Thermostats With Both Temperature and Humidity Displays

▍Specification:

․BACnet MS/ TP, RS-485 open protocol
communication with complete baud rate selections
․For 2-Pipe or 4-Pipe Fan-Coil Unit, AHUs,
or pressure dependent VAVs application
of floating control.
․Advanced time proportional plus integral (PI)
algorithm applied to floating control
for different stroke times
․The 1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Full-fledged configurable parameters such as
switching differential, cycle time, and etc
to provide customized control requirements.
․Effective run time accumulation for system
reading/resetting
․Room temperature or setpoint temperature
selectable for normal display
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Minimum open/ close and on/ off time adjustments
․User’s buttons and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBM500-H Series-Modbus Full Configurable Floating Control Thermostats With Both Temperature and Humidity Displays

▍Specification:

․RS485 Modbus/RTU protocol communication with
complete baud rate and parity selections
․For 2-Pipe or 4-Pipe Fan-Coil Unit, AHUs,
or pressure dependent VAVs application
of floating control.
․Advanced time proportional plus integral (PI)
algorithm applied to floating control for
different stroke times
․The 1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Full-fledged configurable parameters such as
switching differential, cycle time, and etc
to provide customized control requirements.
․Effective run time accumulation for system
reading/resetting
․Room temperature or setpoint temperature
selectable for normal display
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface for
connecting to hotel window/door open detection
contact for energy saving control
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Minimum open/ close and on/ off time adjustments
․User’s buttons and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBS500-H Series-Full Configurable Floating Control Thermostats With Both Temperature and Humidity Displays

▍Specification:

․For 2-Pipe or 4-Pipe Fan-Coil Unit, AHUs,
or pressure dependent VAVs application
of floating control.
․Advanced time proportional plus integral (PI)
algorithm applied to floating control for
different stroke times
․The 1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Full-fledged configurable parameters such as
switching differential, cycle time, and etc
to provide customized control requirements.
․Room temperature or setpoint temperature
selectable for normal display
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional digital input (DI) contact for
connecting to room’s door/window contact
to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Minimum open/ close and on/ off time adjustments
․User’s buttons and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBB100-H Series-BTL Certified BACnet® MS/TP Digital Multi-stage Control Thermostat with Both Temperature and Humidity Displays

▍Specification:

․BTL certifiedBACnet MS/ TP, RS-485 open protocol
communication with complete baud rate selections
․Suitable for single to multi-stage On/Off
step temperature control applications.
․Adjustable differential and stage band width
algorithm applied to multi-stage step controls
․Adjustable minimum staging/ on/ off time
․Effective run time accumulation for system
reading/resetting
․Room temperature digital display and user
selected temperature setting on demand
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied set-point for heating
and cooling mode control
․1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Optional settable countdown Timer (0 to 24 hours)
function to turn off control output when time expires
․Optional sleep mode function for raising 2℃
setpoint temperature in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC/ oF and %RH displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBM100-H Series-Modbus Digital Multi-stage Control Thermostat with Both Temperature and Humidity Displays

▍Specification:

․RS485 Modbus/RTU open protocol communication
with complete baud rate and parity selections
․Suitable for single to multi-stage On/Off step
temperature control applications.
․Adjustable differential and stage band width
algorithm applied to multi-stage step controls
․Adjustable minimum staging/ on/ off time
․Effective run time accumulation for system
reading/resetting
․Room temperature or set-point temperature
display selectable on demand
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied set-point for heating
and cooling mode control
․1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Optional settable countdown Timer (0 to 24 hours)
function to turn off control output when time expires
․Optional sleep mode function for raising 2℃
setpoint temperature in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC/ oF and %RH displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TBS100-H Series-Full Configurable Digital Multi-stage Thermostats With Both Temperature and Humidity Displays

▍Specification:

․Suitable for single to multi-stage
On/Off control applications.
․Adjustable differential and stage band width
algorithm applied to multi-stage step controls
․Adjustable minimum staging/ on/ off time
․Room temperature digital display and user
selected temperature setting on demand
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied set-point for heating
and cooling mode control
․1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Optional settable countdown Timer (0 to 24 hours)
function to turn off control output when time expires
․Optional sleep mode function for raising 2℃
setpoint temperature in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable