TBB400-W Series Wi-Fi BACnet Full Configurable Digital Fan Coil Unit Thermostats

▍Specification:

․Wi-Fi BACnet IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure Wi-Fi parameters
․Suitable for 2-pipe or 4-pipe Fan-coil HVAC system of On/Off controls.
․Effective run time accumulation for system reading/ resetting
․The 1- to 3-fan speed can be operated in the mode of auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature selectable for normal display
․Cool, heat, or both auto/ manual changeover with adjustable zero energy band
․Full configurable parameters such as switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to on/off control
․Optional Remote sensor (RS) input interface for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for connecting to hotel card key , occupied/unoccupied sensor or lighting interlock signal
․Optional extra digital input (DI) interface for connecting to hotel window/door open detection contact for energy saving control
․Adjustable unoccupied setpoints for energy saving
․Optional settable countdown Timer (0 to 24 hours) function to stop control output when time expires
․Optional sleep mode function for raising temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user settings during power loss
․Each button and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status

TBM400-W Series-Wi-Fi Modbus Full Configurable Digital Fan Coil Unit Thermostats

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module
․Suitable for 2-pipe or 4-pipe Fan-coil
HVAC system of On/Off controls.
․Effective run time accumulation for system
reading/resetting
․The 1- to 3-fan speed can be operated in
the mode of auto changeover or manual
selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied setpoints for energy saving
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Each button and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status

TCM400-W Series-Wi-Fi MODBUS TCP/ IP Full Configurable Digital Fan-coil Unitary Controllers

▍Specification:

․Wi-Fi Modbus TCP/ IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module
․Suitable for 2-pipe or 4-pipe Fan-coil, AHUs,
heat pumps, and other HVAC system of On/Off controls
․Effective run time accumulation for system
reading/resetting
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control outputs when time expires
․Optional sleep mode function for raising 2 ℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TCMPx400-W Series-Programmable Wi-Fi Modbus Digital FCU Controllers

▍Specification:

․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate or
whole week programmed for weekday and
weekend with 4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or works as Access Point
․Suitable for 2-pipe or 4-pipe Fan-coil HVAC
system of On/Off controls
․Effective run time accumulation for system
reading/resetting
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional WBS092 series slave Wall Setter
․Get a temperature from wall Setter for control
and get a temperature from NTC10K ohm
sensor for monitor
․An remote sensor (RS) input interface for
connecting to NTC10K remote temperature sensor
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function for raising 2 ℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains
user settings during power loss

TBM400-H-W Series WiFi Modbus Full Configurable Digital FCU Thermostats With Both Temperature and Humidity Displays

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or Works as Access Point
․Suitable for 2-pipe or 4-pipe Fan-coil
HVAC system of On/Off controls.
․The 1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising t
emperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Each button and Energy Saving lockable
․oC or oF and relative humidity (%RH) displays
․Control off output when system at “OFF” status

TBM700-W Series-Wi-Fi Modbus Digital Temperature Controllers PI Modulating with On/Off Heating/ Cooling Control

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module
․Effective run time accumulation for system
reading/resetting
․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to modulating control and/or floating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Minimum Cycle/ On/ Off time settable
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input for
Window/ Door open detection to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status

TCM700-W Series-Wi-Fi MODBUS TCP/ IP PI Modulating with On/Off Heating/ Cooling Controllers

▍Specification:

․Wi-Fi Modbus TCP/ IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module
․Suitable for 2-pipe or 4-pipe Fan-coil, AHUs,
heat pumps, and other HVAC system of On/Off controls
․Effective run time accumulation for system
reading/resetting
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Optional Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control outputs when time expires
․Optional sleep mode function for raising 2 ℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TCMPx700-W Series-Programmable Wi-Fi MODBUS TCP/ IP PI Modulating with On/Off Heating/ Cooling Controllers

▍Specification:

․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate or
whole week programmed for weekday and weekend
with 4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․Wi-Fi Modbus TCP/ IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or works as Access Point
․Suitable for 2-pipe or 4-pipe Fan-coil, AHUs,
heat pumps, and other HVAC system
of On/Off controls
․1- to 3- fan speed can be operated in auto
mode or manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Optional Wall Setter
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status

TBB700-W Series Wi-Fi BACnet Digital Temperature Controllers PI Modulating with On/Off Heating/ Cooling Control

▍Specification:

․Wi-Fi BACnet IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure Wi-Fi parameters
․Effective run time accumulation for system reading/ resetting
․The fan speed can be operated in the mode of auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature selectable for normal display
․Full configurable parameters such as switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to modulating control and/or floating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Minimum Cycle/ On/ Off time settable
․Optional Remote sensor (RS) input interface for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for connecting to hotel card key , occupied/unoccupied sensor or lighting interlock signal
․Optional extra digital input for Window/ Door open detection to save energy
․Adjustable unoccupied setpoints for heating and cooling mode control
․Optional settable countdown Timer (0 to 24 hours) function to stop control output when time expires
․Optional sleep mode function for raising 2℃temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status

TBM500-W Series-Wi-Fi Modbus Full Configurable Digital Time PI Floating Control Thermostats for 2-Pipe or with Heater Relay Controls

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module
․For 2-Pipe or with heater Fan-Coil Unit,
AHUs, or pressure dependent VAVs application
of floating control.
․Proportional plus integral (PI) algorithm
applied to floating control for
different stroke times
․The 1- to 3-fan speed can be operated in
the mode of auto changeover or
manual selected continuous mode.
․Full-fledged configurable parameters such as
switching differential, cycle time, and etc to
provide customized control requirements.
․Effective run time accumulation for system
reading/resetting
․Room temperature or setpoint temperature
selectable for normal display
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or lighting
interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Minimum open/ close and on/ off time adjustments
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status

TCM500-W Series-Wi-Fi MODBUS TCP/ IP Full Configurable Digital Floating Unitary Controllers

▍Specification:

․Wi-Fi Modbus TCP/ IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module
․Suitable for 2-pipe or 4-pipe Fan-coil, AHUs,
heat pumps, and other HVAC system
of floating and/or on-off controls
․Effective run time accumulation for system
reading/resetting
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or manual selected
continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control outputs when time expires
․Optional sleep mode function for raising 2 ℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settabl

TCMPx500-W Series-Programmable Wi-Fi MODBUS TCP/ IP Full Configurable Digital Floating Unitary Controllers

▍Specification:

․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate or
whole week programmed for weekday and
weekend with 4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․Wi-Fi Modbus TCP/ IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or works as Access Point
․Suitable for 2-pipe or 4-pipe Fan-coil, AHUs,
heat pumps, and other HVAC system of floating
and/or on-off controls
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function
․Non-volatile memory (EEPROM) retains
user settings during power loss
․Control off output when system at “OFF” status

TBB500-W Series Wi-Fi BACnet Full Configurable Digital Time PI Floating Control Thermostats for 2-Pipe or with Heater Relay Controls

▍Specification:

․Wi-Fi BACnet IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure Wi-Fi parameters
․For 2-Pipe or with heater Fan-Coil Unit, AHUs, or pressure dependent VAVs application of floating control.
․Proportional plus integral (PI) algorithm applied to floating control for different stroke times
․The 1- to 3-fan speed can be operated in the mode of auto changeover or manual selected continuous mode.
․Full-fledged configurable parameters such as switching differential, cycle time, and etc to provide customized control requirements.
․Effective run time accumulation for system reading/ resetting
․Room temperature or setpoint temperature selectable for normal display
․Optional Remote sensor (RS) input interface for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for connecting to hotel card key , occupied/unoccupied sensor or lighting interlock signal
․Optional extra digital input (DI) interface for connecting to hotel window/door open detection contact for energy saving control
․Adjustable unoccupied setpoints for heating and cooling mode control
․Optional settable countdown Timer (0 to 24 hours) function to stop control output when time expires
․Non-volatile memory (EEPROM) retains user settings during power loss
․Minimum open/ close and on/ off time adjustments
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status

TBM100-W Series -Wi-Fi Modbus Full Configurable Digital Multi-stage Controllers/ Thermostats

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or works as Access Point
․Suitable for single to multi-stage On/Off
step control applications.
․Adjustable differential and stage band width
algorithm applied to multi-stage step controls
․Adjustable minimum staging/ on/ off time
․Effective run time accumulation for system
reading/resetting
․Room temperature digital display and user
selected temperature setting on demand
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied set-point for heating
and cooling mode control
․1- to 3-fan speed can be operated in the
mode of auto changeover or manual selected
continuous mode.
․Optional settable countdown Timer (0 to 24 hours)
function to turn off control output when time expires
․Optional sleep mode function for raising 2℃
setpoint temperature in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status

TCM100-W Series-Wi-Fi MODBUS TCP/ IP Digital Multi-stage Control Unitary Controllersa

▍Specification:

․Wi-Fi Modbus TCP/ IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or Works as Access Point
․Suitable for Fan-coil, AHUs, heat pumps,
and other HVAC system of multi-stage
On/Off step controls
․Effective run time accumulation for system
reading/resetting
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or manual selected
continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control outputs when time expires
․Optional sleep mode function for raising 2 ℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TCMPx100-W Series-Programmable Wi-Fi MODBUS TCP/ IP Digital Multi-stage Control Unitary Controllers

▍Specification:

․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate or
whole week programmed for weekday and
weekend with 4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․Wi-Fi Modbus TCP/ IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or Works as Access Point
․Suitable for Fan-coil, AHUs, heat pumps, and
other HVAC system of multi-stage On/Off step controls
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function
․Non-volatile memory (EEPROM) retains
user settings during power loss
․Control off output when system at “OFF” status

TBB100-W Series Wi-Fi BACnet Full Configurable Digital Multi-stage Controllers/ Thermostats

▍Specification:

․Wi-Fi BACnet IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure Wi-Fi parameters
․Suitable for single to multi-stage On/Off step control applications.
․Adjustable differential and stage band width algorithm applied to multi-stage step controls
․Adjustable minimum staging/ on/ off time
․Effective run time accumulation for system reading/ resetting
․Room temperature digital display and user selected temperature setting on demand
․Full configurable parameters such as switching differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for connecting to hotel card key , occupied/unoccupied sensor or lighting interlock signal
․Optional extra digital input (DI) interface for connecting to hotel window/door open detection contact for energy saving control
․Adjustable unoccupied set-point for heating and cooling mode control
․1- to 3-fan speed can be operated in the mode of auto changeover or manual selected continuous mode.
․Optional settable countdown Timer (0 to 24 hours) function to turn off control output when time expires
․Optional sleep mode function for raising 2℃ setpoint temperature in 2 hours when enable
․Non-volatile memory (EEPROM) retains user settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status

WBM091-W Series-Wi-Fi Modbus Wall Setters with Digital Display

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or Works as Access Point
․Operator Interface for connecting to
TCM-W series direct digital unitary controllers or
others which need room temperature information and
user settings
․Digital display of sensed zone temperature
and temperature setting and controller status
․Push button operation for setting and commanding
․Built-in a NTC temperature sensor
․Graphical icon LCD display with optional LED
backlight

TBM600-W Series-Wi-Fi Modbus Networked Full Configurable Digital Heat Pump Thermostats

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or Works as Access Point
․Suitable for heat pump controls.
․Effective run time accumulation for system
reading/resetting
․The 1- to 3-fan speed can be operated in
the mode of auto changeover or
manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cooling and/or heating, auto/ manual
changeover with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional settable countdown Timer (0 to 24 hours)
function to stop control output when time expires
․Optional sleep mode function for raising
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Each button and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TCM600-W Series-Wi-Fi Modbus Digital Heat Pump Controllers with Optional WDS092 Wall Setter

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or works as Access Point
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Optional WDS092 wall setter
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

TCMPx600-W Series-Wi-Fi Modbus Programmable Digital Heat Pump Controllers with Optional WDS092 Wall Setter

▍Specification:

․Wi-Fi Modbus TCP/IP open protocol communication
․IEEE 802.11 b/g
․Web Server based Configuration to configure
the Wi-Fi module or works as Access Point
․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate or
whole week programmed for weekday and weekend
with 4 schedules and 4timers each
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional Energy Saving input (ESI) interface
for connecting to hotel card key ,
occupied/unoccupied sensor or
lighting interlock signal
․Optional extra digital input (DI) interface
for connecting to hotel window/door open
detection contact for energy saving control
․Optional WDS092 wall setter
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Non-volatile memory (EEPROM) retains
user settings during power loss
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable