Programmable Thermostats / Controllers-product banner photo

Programmable Thermostats / Controllers

- Complete Configurable Control Parameters.
- AC 24V (CE Certified)  / 110V(CE Certified)  / 230V(CE Certified)  +/-15% 50/60Hz.
- Advanced Proportional / Integral (PI) Control.

▌Thermostats/ Controllers/ Humidistat : On-Off


TBMPx400 Series-Modbus Programmable Digital Thermostats
TBMPx400 Series-Modbus Programmable Digital Thermostats product photo
TBMPx400 Series-Modbus Programmable Digital Thermostats Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․RS-485 Modbus/ RTU open protocol communication
with complete baud rate and parity selections
․Suitable for 2-pipe or 4-pipe Fan-coil unit,
heat pump,hydronic or electric heater HVAC system
of On/Off controls.
․Effective run time accumulation for system
reading/resetting
․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool, heat, or both auto/ manual changeover with
adjustable zero energy band
․Advanced configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to
on/off control
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting switch signal
․Optional digital input (DI) contact for detecting
room's door/window open to save energy
․Non-volatile memory (EEPROM) retains user
settings during power loss
․oC or oF display switch with one button, no
fluctuation sensing algorithm
TBBPx400 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Fan Coil Thermostats
TBBPx400 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Fan Coil Thermostats product photo
TBBPx400 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Fan Coil Thermostats Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day & time
․BACnet MS/ TP, RS-485 open protocol
communication with complete baud rate selections
․Suitable for 2-pipe or 4-pipe Fan-coil HVAC system
of On/Off controls.
․Effective run time accumulation for system
reading/resetting
․The 1- to 3-fan speed can be operated in the mode
of auto changeover or manual selected continuous
mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool, heat, or both auto/ manual changeover with
adjustable zero energy band
․Full configurable parameters such as switching
differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to
on/off control
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface for
connecting to hotel window/door open detection
contact for energy saving control
․Adjustable unoccupied setpoints for heating and
cooling mode control
․Optional sleep mode function for raising
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Each button and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status
TCM/BPx400 Series-Programmable Modbus/BACnet Full Configurable Digital Fan-coil Controllers
TCM/BPx400 Series-Programmable Modbus/BACnet Full Configurable Digital Fan-coil Controllers product photo
TCM/BPx400 Series-Programmable Modbus/BACnet Full Configurable Digital Fan-coil Controllers Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate
or whole week programmed for weekday and
weekend with 4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․RS485 Modbus/ RTU or BACnet MS/TP open
protocol communication with complete
baud rate selections
․Suitable for 2-pipe or 4-pipe Fan-coil
HVAC system of On/Off controls
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover
or manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional WDS091 series slave Wall Setter
or WDM094 series master Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input
from wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status

▌Thermostats/ Controllers/ Humidistat : Modulating


TBSPx700 Series-Programmable Digital Temperature Controllers PI Modulating with On/Off Heating/ Cooling Control
TBSPx700 Series-Programmable Digital Temperature Controllers PI Modulating with On/Off Heating/ Cooling Control product photo
TBSPx700 Series-Programmable Digital Temperature Controllers PI Modulating with On/Off Heating/ Cooling Control Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․Early fine tune function to ensure programmed
temperature is reached by scheduled time
․12- or 24- hour format with battery backed
day and time
․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to modulating control and/or floating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface for
Window/Door open detection to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
TBMPx700 Series-Modbus Programmable Digital Temperature Controllers PI Modulating with On/Off Heating/ Cooling Control
TBMPx700 Series-Modbus Programmable Digital Temperature Controllers PI Modulating with On/Off Heating/ Cooling Control product photo
TBMPx700 Series-Modbus Programmable Digital Temperature Controllers PI Modulating with On/Off Heating/ Cooling Control Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․RS-485 Modbus/ RTU protocol communication with
complete baud rate and parity selections
․Effective run time accumulation for system
reading/resetting
․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to modulating control and/or floating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input for
Window/ Door open detection to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
TBBPx700 Series-Programmable BACnet® MS/TP Networked Full Configurable PI Modulating with On/Off Heating/ Cooling Control
TBBPx700 Series-Programmable BACnet® MS/TP Networked Full Configurable PI Modulating with On/Off Heating/ Cooling Control product photo
TBBPx700 Series-Programmable BACnet® MS/TP Networked Full Configurable PI Modulating with On/Off Heating/ Cooling Control Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day & time
․BACnet MS/ TP, RS-485 open protocol
communication with complete baud rate selections
․Effective run time accumulation for system
reading/resetting
․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Full configurable parameters such as switching
differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to modulating control and/or floating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Minimum Cycle/ On/ Off time settable
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input for
Window/ Door open detection to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status
TCM/BPx700 Series-BTL Certified Modbus / BACnet Networked Full Programmable Configurable PI Modulating with On/Off Heating/ Cooling Controllers
TCM/BPx700 Series-BTL Certified Modbus / BACnet Networked Full Programmable Configurable PI Modulating with On/Off Heating/ Cooling Controllers product photo
TCM/BPx700 Series-BTL Certified Modbus / BACnet Networked Full Programmable Configurable PI Modulating with On/Off Heating/ Cooling Controllers Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate or
whole week programmed for weekday and weekend
with 4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․RS485 Modbus/ RTU or BTL certified BACnet
MS/TP open protocol communication with complete
baud rate selections
․The fan speed can be operated in the mode of
auto changeover or manual selected continuous mode.
․Room temperature or setpoint temperature
selectable for normal display
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to modulating control
․0(2) to 10 Vdc or 10 to 0(2) Vdc control signal
output selectable for direct / reverse acting output
․Optional multi-stage on/off control outputs
․Optional Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional extra digital inputs for monitoring
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status

▌Thermostats/ Controllers/ Humidistat : Floating


TBBPx500 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Floating Control Thermostats for 2-Pipe or with Heater Relay Controls
TBBPx500 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Floating Control Thermostats for 2-Pipe or with Heater Relay Controls product photo
TBBPx500 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Floating Control Thermostats for 2-Pipe or with Heater Relay Controls Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day & time
․BACnet MS/ TP, RS-485 open protocol
communication with complete baud rate selections
․For 2-Pipe or with heater FCU, AHUs, or pressure
dependent VAVs application of floating control.
․Proportional plus integral (PI) algorithm
applied to floating control for different stroke times
․The 1- to 3-fan speed can be operated in the mode
of auto changeover or manual selected continuous
mode.
․Full-fledged configurable parameters such as
switching differential, cycle time, and etc to
provide customized control requirements.
․Effective run time accumulation for system
reading/resetting
․Room temperature or setpoint temperature
selectable for normal display
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface for
connecting to hotel window/door open detection
contact for energy saving control
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Minimum open/ close and on/ off time adjustments
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” statu
TBSPx500 Series-Programmable Full Configurable Digital Time PI Floating Control Thermostats for 2-Pipe or with Heater Relay Controls
TBSPx500 Series-Programmable Full Configurable Digital Time PI Floating Control Thermostats for 2-Pipe or with Heater Relay Controls product photo
TBSPx500 Series-Programmable Full Configurable Digital Time PI Floating Control Thermostats for 2-Pipe or with Heater Relay Controls Specification Download photo

▍Specification:
․Pre-set whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․For 2-Pipe with heater FCU, AHUs, or pressure
dependent VAVs application of floating control.
․Proportional plus integral (PI) algorithm
applied to floating control for different stroke times
․The 1- to 3-fan speed can be operated in the mode
of auto changeover or manual selected continuous
mode.
․Full-fledged configurable parameters such as
switching differential, cycle time, and etc to
provide customized control requirements.
․Room temperature or setpoint temperature
selectable for normal display
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional digital input (DI) contact for connecting
to room’s door/window contact to save energy
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function for raising 2℃
temperature setpoint in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Minimum open/ close and on/ off time adjustments
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable
TBMPx500 Series-Programmable Modbus Full Configurable Digital Time PI Floating Control Thermostats for 2-Pipe or with Heater Relay Controls
TBMPx500 Series-Programmable Modbus Full Configurable Digital Time PI Floating Control Thermostats for 2-Pipe or with Heater Relay Controls product photo
TBMPx500 Series-Programmable Modbus Full Configurable Digital Time PI Floating Control Thermostats for 2-Pipe or with Heater Relay Controls Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day & time
․RS485 Modbus/RTU protocol communication
․For 2-Pipe with heater FCU, AHUs, or pressure
dependent VAVs application of floating control.
․Proportional plus integral (PI) algorithm
applied to floating control for different stroke times
․The 1- to 3-fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Full-fledged configurable parameters such as
switching differential, cycle time, and etc to
provide customized control requirements.
․Effective run time accumulation for system
reading/resetting
․Room temperature or setpoint temperature
selectable for normal display
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface for
connecting to hotel window/door open detection
contact for energy saving control
․Adjustable unoccupied setpoints for heating and
cooling mode control
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Minimum open/ close and on/ off time adjustments
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable
TCM/BPx500 Series-Programmable Modbus/ BACnet Full Configurable Digital Floating Control Temperature Controllers
TCM/BPx500 Series-Programmable Modbus/ BACnet Full Configurable Digital Floating Control Temperature Controllers product photo
TCM/BPx500 Series-Programmable Modbus/ BACnet Full Configurable Digital Floating Control Temperature Controllers Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate or
whole week programmed for weekday and
weekend with 4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․RS485 Modbus/ RTU or BACnet MS/TP open
protocol communication with complete
baud rate selections
․Suitable for 2-pipe or 4-pipe Fan-coil
HVAC system of floating controls
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function
․Non-volatile memory (EEPROM) retains
user settings during power loss
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

▌Thermostats/ Controllers/ Humidistat : Multi-Stage


TBSPx100 Series-Full Configurable Programmable Digital Multi-stage Control Thermostats
TBSPx100 Series-Full Configurable Programmable Digital Multi-stage Control Thermostats product photo
TBSPx100 Series-Full Configurable Programmable Digital Multi-stage Control Thermostats Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with up to
4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․Suitable for single to multi-stage
On/Off control applications.
․Adjustable differential and stage band width
algorithm applied to multi-stage step controls
․Room temperature digital display and user
selected temperature setting on demand
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface for
connecting to hotel window/door open detection
contact for energy saving control
․Adjustable unoccupied set-point for heating
and cooling mode control
․1- to 3-fan speed can be operated in the
mode of auto changeover or manual
selected continuous mode.
․Optional settable countdown Timer (0 to 24 hours)
function to turn off control output when time expires
․Optional sleep mode function for raising 2℃
setpoint temperature in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable
TBMPx100 Series-Programmable Modbus Full Configurable Digital Multi-stage Controllers/ Thermostats
TBMPx100 Series-Programmable Modbus Full Configurable Digital Multi-stage Controllers/ Thermostats product photo
TBMPx100 Series-Programmable Modbus Full Configurable Digital Multi-stage Controllers/ Thermostats Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․RS485 Modbus/RTU open protocol communication
with complete baud rate and parity selections
․Suitable for single to multi-stage On/Off
step control applications.
․Adjustable differential and stage band width
algorithm applied to multi-stage step controls
․Effective run time accumulation for system
reading/resetting
․Room temperature digital display and user
selected temperature setting on demand
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface for
connecting to hotel window/door open detection
contact for energy saving control
․Adjustable unoccupied set-point for heating and
cooling mode control
․1- to 3-fan speed can be operated in
the mode of auto changeover or manual
selected continuous mode.
․Optional sleep mode function for raising 2℃
setpoint temperature in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status
TBBPx100 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Multi-stage Controllers/ Thermostats
TBBPx100 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Multi-stage Controllers/ Thermostats product photo
TBBPx100 Series-BACnet® MS/TP Networked Full Configurable Programmable Digital Multi-stage Controllers/ Thermostats Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be separate or whole week
programmed for weekday and weekend with 4
schedules and 4 timers each
․12- or 24- hour format with battery backed
day & time
․BACnet MS/ TP, RS-485 open protocol
communication with complete baud rate selections
․Suitable for single to multi-stage On/Off
control applications.
․Adjustable differential and stage band width
algorithm applied to multi-stage step controls
․Effective run time accumulation for system
reading/resetting
․Room temperature digital display and user
selected temperature setting on demand
․Full configurable parameters such as switching
differential, cycle time, and etc.
․Optional Remote sensor (RS) input interface for
connecting to remote temperature sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/unoccupied
sensor or lighting interlock signal
․Optional extra digital input (DI) interface for
connecting to hotel window/door open detection
contact for energy saving control
․Adjustable unoccupied set-point for heating and
cooling mode control
․1- to 3-fan speed can be operated in the
mode of auto changeover or manual selected
continuous mode.
․Optional sleep mode function for raising 2℃
setpoint temperature in 2 hours when enable
․Non-volatile memory (EEPROM) retains user
settings during power loss
․User’s buttons and Energy Saving lockable
․oC or oF display, no fluctuation sensing algorithm
․Control off output when system at “OFF” status
TCM/BPx100 Series-Programmable Modbus/BACnet Full Configurable Digital Multi-stage Control Temperature Controllers
TCM/BPx100 Series-Programmable Modbus/BACnet Full Configurable Digital Multi-stage Control Temperature Controllers product photo
TCM/BPx100 Series-Programmable Modbus/BACnet Full Configurable Digital Multi-stage Control Temperature Controllers Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1,
or 7 day program that can be separate or
whole week programmed for weekday and weekend
with 4 schedules and 4 timers each
․12- or 24- hour format with battery backed
day and time
․RS485 Modbus/ RTU or BACnet MS/TP open
protocol communication with complete
baud rate selections
․Suitable for Fan-coil HVAC system of
multi-stage on-off step controls
․Optional 1- to 3- fan speed can be operated
in the mode of auto changeover or
manual selected continuous mode.
․Cool, heat, or both auto/ manual changeover
with adjustable zero energy band
․Full configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off control
․Optional WDS092 series slave Wall Setter
․Optional Remote sensor (RS) input interface
for connecting to remote temperature sensor
․Selectable temperature sensor input from
wall setter or RS interface
․Optional energy saving input (ESI) interface
for room occupied/unoccupied detection device
․Optional one extra digital input interfaces
for window or door open/close detection device
․Adjustable unoccupied setpoints for heating
and cooling mode control
․Optional sleep mode function
․Non-volatile memory (EEPROM) retains user
settings during power loss
․Control off output when system at “OFF” status
․Maximum and minimum set-point limits settable

▌Multi Zone Heat Pump Controller


TCSPx600-HP Series- Programmable Heat Pump Controllers with WBS092 Wall Setter
TCSPx600-HP Series- Programmable Heat Pump Controllers with WBS092 Wall Setter product photo
TCSPx600-HP Series- Programmable Heat Pump Controllers with WBS092 Wall Setter Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day program that can be separate or whole week programmed for weekday and weekend with 4 schedules and 4 timers each.
․Early fine tune function to ensure programmed temperature is reached by scheduled time.
․Effective run time accumulation for system reading / resetting.
․Optional 1- to 3- fan speed can be operated in the mode of auto changeover or manual selected continuous mode.
․Cool, heat, or both auto / manual changeover with adjustable zero energy band.
․Full configurable parameters such as switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to on/off control.
․With optional WBS092 wall setter.
․With optional I_F600 series interface board and TAS110F controllers for controlling up to 4-zone temperature usages.
․Adjustable unoccupied setpoints for heating and cooling mode control.
․Non-volatile memory (EEPROM) retains user settings during power loss.
․Control off output when system at “OFF” status.
․Maximum and minimum set-point limits settable.
TBSPx600-HP- Series Programmable Heat Pump Thermostats
TBSPx600-HP- Series Programmable Heat Pump Thermostats product photo
TBSPx600-HP- Series Programmable Heat Pump Thermostats Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be programmed for each
individual day or collectively several days
to speed up programming flexibility
․Early start function to ensure programmed
temperature will be reached by scheduled time
․12- or 24- hour format with battery backed
day and time
․Optional Daylight Saving auto adjustment
․Suitable for heat pump, hydronic or electric
heater HVAC system of On/Off controls.
․The fan speed can be operated in the mode of
auto changeover or manual continuous or
circulation mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool/ heat auto or manual changeover with
adjustable zero energy band
․Advanced configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off cycling control
․Optional Remote sensor (RS) input interface for
connecting to remote outdoor/indoor temperature
sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/ unoccupied
sensor or lighting switch signal
․Optional digital input (DI) contact for detecting
room’s door/window open to save energy
․Non-volatile memory (EEPROM) retains user
settings during power loss
․oC or oF display switch with one button,
no fluctuation sensing algorithm
TBMPx600-HP- Series Modbus Programmable Heat Pump Thermostats
TBMPx600-HP- Series Modbus Programmable Heat Pump Thermostats product photo
TBMPx600-HP- Series Modbus Programmable Heat Pump Thermostats Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day
program that can be programmed for each
individual day or collectively several days
to speed up programming flexibility
․Early start function to ensure programmed
temperature will be reached by scheduled time
․12- or 24- hour format with battery backed
day and time
․RS-485 Modbus/ RTU open protocol communication
with complete baud rate and parity selections
․Optional Daylight Saving auto adjustment
․Suitable for heat pump, hydronic or electric
heater HVAC system of On/Off controls.
․The fan speed can be operated in the mode of
auto changeover or manual continuous or
circulation mode.
․Room temperature or setpoint temperature
selectable for normal display
․Cool/ heat auto or manual changeover with
adjustable zero energy band
․Advanced configurable parameters such as
switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm
applied to on/off cycling control
․Optional Remote sensor (RS) input interface for
connecting to remote outdoor/ indoor temperature
sensor
․Optional Energy Saving input (ESI) interface for
connecting to hotel card key , occupied/ unoccupied
sensor or lighting switch signal
․Optional digital input (DI) contact for detecting
room’s door/window open to save energy
․Non-volatile memory (EEPROM) retains user
settings during power loss
․oC or oF display switch with one button,
no fluctuation sensing algorithm
TBBPx600 Series-BTL Certified BACnet Programmable Heat Pump Thermostats
TBBPx600 Series-BTL Certified BACnet Programmable Heat Pump Thermostats product photo
TBBPx600 Series-BTL Certified BACnet Programmable Heat Pump Thermostats Specification Download photo

▍Specification:
․Pre-set a whole week, 5-2, 5-1-1, or 7 day program that can be programmed for each individual day or collectively several days to speed up programming flexibility.
․Optional early start function to reach programmed temperature by scheduled time.
․12- or 24- hour format with battery backed day and time.
․BTL certified RS-485 BACnet/ RTU open protocol communication with complete baud rate and parity selections.
․Optional Daylight Saving auto adjustment.
․Suitable for heat pump, hydronic or electric heater HVAC system of On/Off controls.
․The fan speed can be operated in the mode of auto changeover or manual continuous or circulation mode.
․Room temperature or setpoint temperature selectable for normal display.
․Cool/ heat auto or manual changeover with adjustable zero energy band.
․Advanced configurable parameters such as switching differential, cycle time, and etc.
․Proportional plus integral (PI) algorithm applied to on/off cycling control.
․Optional Remote sensor (RS) input interface for connecting to remote outdoor/ indoor temperature sensor.
․Optional Energy Saving input (ESI) interface for connecting to hotel card key , occupied/ unoccupied sensor or lighting switch signal.
․Optional digital input (DI) contact for detecting room’s door/window open to save energy.
․Non-volatile memory (EEPROM) retains user settings during power loss.
․oC or oF display switch with one button, no fluctuation sensing algorithm.